Is the Whirlpool Stove Not Heating Up? Here’s What You Need to Know

You’re not alone if you’re having trouble with your Whirlpool stove not heating up. This is a common issue that many homeowners face. There are a few potential causes for this problem, and we’re here to help you troubleshoot and find a solution.

A faulty heating element is one possible reason why your Whirlpool stove won’t heat up. This is the part of the stove that generates the heat. If it’s not working properly, your stove won’t be able to get hot. 

Another potential cause is a malfunctioning thermostat. The thermostat regulates the stove’s temperature, so if it’s not working correctly, your stove may not heat up at all.

No matter the cause of the issue, it’s important to address it immediately to ensure your stove is functioning properly and safely. In the following paragraphs, we’ll go over some troubleshooting steps you can take to identify and fix the problem with your Whirlpool stove not heating up.

Understanding the Issue

Identifying the Problem

When a Whirlpool stove fails to heat up, there could be several reasons behind it. Common causes of this issue include a faulty heating element, a broken thermostat, or a malfunctioning control board. Identifying the root cause of the problem is essential to fix it effectively.

Common Symptoms

The most obvious symptom of a Whirlpool stove not heating up is that it fails to cook food. However, some other signs could indicate a problem with the stove. These include:

• The stove’s heating element glows red but does not produce heat.
• The stove produces heat but not enough to cook food properly.
• The stove produces heat only on some burners and not on others.

If you notice any of these symptoms, inspecting the stove and identifying the problem is crucial.

The next section will discuss possible solutions to fix the issue.

Potential Causes

If your Whirlpool stove is not heating up properly, there could be a number of potential causes. In this section, we will explore some of the most common reasons why your stove may not be heating up and what you can do to troubleshoot the issue.

1. Faulty Heating Element

A faulty heating element is one of the most common causes of a stove not heating up. The heating element is responsible for generating heat in the oven. If it is not working properly, the oven will not heat up. You can check the heating element by visually inspecting it for any signs of damage or wear and tear. If you notice any damage, you must replace the heating element.

2. Broken Thermostat

Another potential cause of a stove not heating up is a broken thermostat. The thermostat is responsible for regulating the temperature inside the oven. The oven may not reach the desired temperature if it is not working properly. You can check the thermostat by using a multimeter to test for continuity. If the thermostat is not working properly, you must replace it.

3. Malfunctioning Control Board

A malfunctioning control board can also cause a stove not to heat up properly. The control board is responsible for sending signals to the heating elements. If it is not working properly, the oven may not heat up. You can inspect the control board for any signs of damage or wear and tear. If you notice any damage, you must replace the control board.

Troubleshooting Steps

1. Checking the Heating Element

The first thing to check is the heating element. We need to unplug the stove and remove the back panel to do this. We can then visually inspect the heating element for any signs of damage or wear. We must replace the heating element if we see any broken or burnt-out sections.

2. Testing the Thermostat

If the heating element looks fine, the next step is to test the thermostat. We can do this by using a multimeter to check for continuity. 

First, we need to unplug the stove and remove the back panel. We can then locate the thermostat and remove it from the stove. We can then use the multimeter to check for continuity across the thermostat contacts. If we don’t get a reading, the thermostat is faulty and needs to be replaced.

3. Examining the Control Board

The issue may be with the control board if the heating element and thermostat are working properly. We can check this by visually inspecting the control board for any signs of damage or wear. If we see any burnt-out components or other damage, we must replace the control board.

In summary, when a Whirlpool stove won’t heat up, we must check the heating element, test the thermostat, and examine the control board. We can quickly identify and fix the issue by following these troubleshooting steps.

Professional Assistance

If you have tried all the troubleshooting steps and your Whirlpool stove still won’t heat up, it may be time to call in a professional. Here are some key things to consider when seeking professional assistance.

When to Call a Professional

Suppose you have exhausted all the basic troubleshooting steps, and your Whirlpool stove won’t heat up. In that case, it is time to call in a professional. Additionally, if you have noticed any of the following issues, it is best to seek the help of a professional:

• The stove is making strange noises
• The stove is emitting strange odors
• The stove is not heating evenly
• The stove is sparking or smoking

Choosing the Right Service

Here are some key things to consider:

• Look for a service that specializes in Whirlpool appliances
• Check for reviews and ratings online
• Ensure that the service is licensed and insured
• Ask for a detailed estimate before agreeing to any repairs

Preventive Measures

Routine Maintenance

We recommend performing routine maintenance to prevent your Whirlpool stove from failing to heat up. First, ensure that the stove is clean, as the buildup of dirt and debris can cause it to malfunction. Wipe down the stovetop and inside the oven regularly with a damp cloth. Be sure to turn off the stove before cleaning.

Additionally, check the stove’s heating elements for damage or wear. If any of the elements are cracked or broken, they may need to be replaced. Consult the stove’s manual for instructions on removing and replacing the elements.

Proper Usage Tips

Proper usage of your Whirlpool stove can also help prevent it from failing to heat up. Always use cookware appropriate for the stove’s heating elements, and ensure that the cookware is centered on the element. Avoid using warped or damaged cookware, as it can cause uneven heating and damage to the stove.

Avoid opening the door frequently, as this can cause heat loss and make the stove work harder to maintain the desired temperature. Additionally, avoid placing foil or other materials directly on the oven’s heating element, which can cause damage and reduce effectiveness.

Frequently Asked Questions